Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 100
items per page: 25 50 75
Sort by:

Abstract

The authors describe the scope of Polish studies in the field of biology and ecology carried on during 20 years of activity of Polish Antarctic Station. Principal results are briefly summarized and ample literature is presented.
Go to article

Abstract

A total of sixty five taxa of marine phytoplankton (diatoms, dinoflagellates, silicoflagellates and cyanoprokaryotes) were recorded in the transect from the cold region of the Antarctic (Weddell Sea) up to La Plata Bay, Argentine in the late austral summer (March 1989). Diatoms were the dominant group in a south-north transect from the Seal-Bay (Princess Martha Land, the Antarctic). Most of the phytoplankton species of the cold Antarctic region disappeared around 50°S where there is a steep water temperature gradient. The diatom flora declined in the regions of increasing temperature, i.e. between 60° and 50° S and was replaced by dinoflagellates of the genus Ceratium. Large centric diatom genera Corethron, Rhizosolenia, Chaetoceros and Dactyliosolen represented the most apparent phytoplankton part. The most common of the small centric diatom genera were Thalassiosira, Asteromphalus, Actinocyclus and Coscinodiscus, while several species of Navicula and Nitzschia were the most abundant pennate forms. The presence of a considerable number of freshwater pennate diatoms, characterized as indifferent in the halobion spectrum and mostly periphytic, might be attributed to survival strategies during their development on the floating coastal ice.
Go to article

Abstract

Phytoplankton samples were collected at 141 stations in the Norwegian, Greenland, Barents and Baltic seas, in July-August 1992 and July-August 1993. In fifteen of these stations 22 unarmoured dinoflagellate species from the order Gymnodiniales belonging to the genera Amphidinium, Cochlodinium, Gymnodinium, Gyrodinium, Torodinium and Polykrikos have been found. Data on 16 species are given here, including synonyms, size or size variation, localities and environmental factors (temperature and salinity at the surface). 14 species are illustrated.
Go to article

Abstract

Suspended matter, phytoplankton and light attenuation were investigated in various North East Greenland, Svalbard and Siberian river mouths in 1992-1994. The amount of mineral suspensions well correlated with freshwater discharge in the case of tidal glacier bays, while such correlation in Siberian rivers and pack ice meltwater was not found. Freshwater phytoplankton species were found in Siberian estuaries only and in two other ecosystems marine and ice phytoplankton species prevailed. The light attenuation connected with freshwater discharge seems to be a key factor limiting primary production in coastal Actic waters in the summer. The amount of glacial suspensions well correlated with the salinity drop in the case of Svalbard, while Siberian river estuaries produced very turbid waters with the suspension loads not correlated to freshwater or depth.
Go to article

Abstract

This paper reports the preliminary results from the studies on the scanning electron microscopical studies on chrysophycean cysts collected in ponds and streams of King George Island (South Shetlands). The cysts play an important role as the survival developmental stages. Fifteen morphotypes are described, six of which are new for science. Particular attention has been paid to the anatomy of the pore, collar structure and to the ornamentation of the cyst surface.
Go to article

Abstract

The paper presents the results of seven-year survey of Antarctic seals along the western shore of Admiralty Bay, King George Island, South Shetland Islands. Five species were monitored during seven of the eight years, between 1988-95, excluding 1993. Numbers of elephant seals and Antarctic fur seals showed strong annual cycles, fur seals with two seasonal peaks. These of the other three species were more irregular. Fewer Weddell seals were seen in 1994 and 1995 then during the period 1988-92; with this exception, no overall trend in numbers was apparent during the period 1988-95.
Go to article

Abstract

Alongside the purely scientific nature and the first wintering in Antarctica, another innovative feature of the Belgica expedition was its multinational composition. Two, out of its seven persons strong scientific staff, were Polish - H. Arctowski and A. B. Dobrowolski. The first served as scientific deputy-leader of the expedition, the other as laboratory assistant and meteorologist. Their contribution to the scientific success of the Belgian Antarctic Expedition outlined in the present paper, turned into the starting point of brilliant academic careers in the native country and at international level. Both, Arctowski and Dobrowolski, were acknowledged as symbols of the Polish explorations and scientific investigations in polar regions.
Go to article

Abstract

The paper provides information on oceanobiological expeditions to the Antarctic organized by Polish Academy of Sciences. The scope of research of five expeditions is described and main achievements of Polish Antarctic studies are summarized.
Go to article

Abstract

Polish exploration and exploitation of marine resources of Antarctic waters date back to the reconnaissance cruise of the Sea Fisheries Institutes (SFI) r/v Profesor Siedlecki in 1974. Since 1975, a co-operation between the Institute of Ecology, Polish Academy of Sciences (PAS) at Dziekanów Leśny and SFI in Gdynia with participation of the University of Agriculture in Szczecin, Faculty Marine Fisheries and Food Technology (UA) was established. Fishing fleets of the Polish Deep-Sea Fisheries Companies Odra, Dalmor and Gryf, since 1976 were operating in the Atlantic sector of Antarctic waters, south of the convergence.
Go to article

Abstract

A. B. Dobrowolski, a member of the Belgian expedition in Belgica to West Antarctica (1897-1899), after his return home became a strong supporter of Polish scientific activity in the Polar countries. His patronage - called by him the "Polar Action", was especially well marked during organization of three Polish expeditions to the Svalbard archipelago: to Bear Island during the 2nd Polar Year, 1932-33 and to Spitsbergen in 1934 and 1938. Apart from his scientific achievements in Antarctica, Dobrowolski was also widely known as an author of popular-scientific books on history of discovery and exploration in the Arctic and the Antarctic.
Go to article

Abstract

The article presents a review of the researches on sea and atmospheric physics conducted by the Polish expeditions in Antarctica from 1977 to 1990.
Go to article

Abstract

During the Polish Geodynamic Expeditions to West Antarctica, 1984-1991, led by A. Guterch, the scientific research of the geological group (leader K. Birkenmajer) included stratigraphic, sedimentological, petrological, tectonic, volcanological and Quaternary geology studies. They were caried out mainly in the area of Antarctic Peninsula, Palmer Archipelago and South Shetland Islands (the results from King George Island have been reviewed separately, in 1996). The major scientific archievements are: (1) introduction of formal lithostrati-graphical standards, recognition of tectonic structure, and sedimentological characteristics of the Trinity Peninsula Group (?Upper Permian-Triassic) metasediments (Antarctic Peninsula: Hope Bay and Paradise Harbour; Livingston Island: Hurd Peninsula); (2) elaboration of Late Mesozoic-TTertiary magmatic successions (Antarctic Peninsula Volcanic Group and Andean Intrusive Suite) on northern Antarctic Peninsula (Hope Bay; Arctowski Peninsula; Paradise Harbour - Gerlache Strait); (3) together with geophysical group: elaboration of lithospheric transect from South Shetland Islands to Antarctic Peninsula; (4) elaboration of Late Cenozoic evolution stages of the Bransfield Basin and Rift, as based on geological and palaeontological record; (5) introduction of a revised volcanostratigraphic standard, and reconstruction of evolution stages, of the Deception Island volcano (South Shetland Islands); (6) reconstruction of the Holocene history in some areas of Antarctic Peninsula (Hope Bay) and South Shetland Islands (King George Island). The results of palaeontological and sedimentological research on Seymour and Cockburn islands (NE Antarctic Peninsula) were presented separately.
Go to article

Abstract

The paper presents a catalogue, with description, detailed map location and references to first publications, of new place names introduced mainly during the Polish Geodynamic Expeditions to West Antarctica, 1984-1991. In the South Shetland Islands, new place names were introduced in parts of King George Island and Deception Island (Some new names for Admiralty Bay, King George Island and Penguin Island, introduced prior to 1984 but not yet formally described, are also included here). In Antarctic Peninsula, new place names have been introduced at Hope Bay (Trinity Peninsula), Arctowski Peninsula-Andvord Bay (Danco Coast/Gerlache Strait) and Paradise Harbour (Danco Coast).
Go to article

Abstract

In general, Antarctic marine bacteria are small, with biovolumes ranging from 0.139 to 0.204 μm-3 cell-1, but their total biomass in seawater is considerable due to relatively high numbers that approximate to 1020 cells km-3. Bacterial biomass becomes more concentrated closer to land. Our multi-year Antarctic studies demonstrated an average total bacterial biomass of 504 tons in Admirality Bay (24 km3) or 21 tons per 1 km3, versus 6.4 tons per 1 km3 in the open ocean. Strikingly, bacterial biomass reached 330 tons per 1 km3 of seawater at the sea-ice edge, as sampled in Goulden Cove in Admiralty Bay. Bacterial biomass in Admirality Bay, which we believe can be enriched by halotolerant and thermotolerant fresh water bacteria from glacial streams, is equal to or even exceeds that of the standing stock of krill (100-630 tons per bay) or other major living components, including phytoplankton (657 tons), flagellates (591 tons), and ciliates (412 tons). However, the bacterial biomass is exceeded by several orders of magnitude by non-living organic matter, which constitutes the basic bacterial carbon source. Factors regulating high bacterial abundance in the vicinity of land are discussed.
Go to article

Abstract

During the Polish Antarctic Geodynamic Expeditions, 1979-91, a wide geophysical and geological programme was performed in the transition zone between the Drake and South Shetland microplates and the Antarctic Plate, in West Antarctica. In the Bransfield Strait area, and along passive continental margin of the Antarctic Peninsula, 20 deep seismic sounding profiles were made. The interpretation yielded two - dimensional models of the crust and lithosphere down to 80 km depth. In the coastal area between the Palmer Archipelago and the Adelaide Island, the Earth's crust has a typical continental structure. Its thickness varies from 36 to 42 km in the coastal area, decreasing to about 25-28 km toward Pacific Ocean. In the surrounding of Bransfield Strait, the Moho boundary depth ranges from 10 km beneath the South Shetland Trench to 40 km beneath Antarctic Peninsula. The crustal structure beneath the Bransfield Strait trough is highly anomalous. Presence of a high-velocity body, with longitudinal seismic wave velocities Vp > 7,0 km/s, was detected there in the 6-32 km depth range. This inhomogeneity was interpreted as an intrusion, coinciding with the Deception-Bridgeman volcanic line. In the transition zone from the Drake Passage to the South Shetland Islands, a seismic boundary in the lower lithosphere occurs at a depth ranging from 35 to 80 km. The dip of both the Moho and this boundary is approximately 25° towards the southeast, indicating the direction of subduction of the Drake Plate lithosphere under the Antarctic Plate. Basing on the results of four Polish Geodynamic Expeditions, the map of crustal thickness in West Antarctica is presented.
Go to article

Abstract

The Ca50Mg20Zn12Cu18 was assessed with different methods in order to characterize its basic characteristics, and to determine whether the amorphous alloy of such composition would be applicable as an implant material. The XRD analysis was conducted to conclude the structure of the initial material. The Ca50Mg20Zn12Cu18 ingot sample demonstrates crystalline structure containing two main intermetallic phases, however as-cast plates show features of an amorphous material, revealing the characteristic amorphous halo on the x-ray patterns. It was confirmed by the scanning electron microscopy method and fracture images revealing chevron pattern morphology with shell type fracture. Corrosion resistance, was studied using the potentiostatic analysis. The amorphous samples show higher resistance than the crystalline one. Post corrosion surface of the Ca50Mg20Zn12Cu18 alloy exhibits high concentration of magnesium and calcium hydroxides, forming the globular structures in large aggregates of spherical units.
Go to article

Abstract

There has been a growing interest in the peritectic due to increasing productivity, quality, and alloy development. Differential scanning calorimetry (DSC) has traditionally been used to study steel solidification but suffers significant limitations when measuring the solidus and peritectic. This work covers a new thermal analysis system that can characterize the peritectic reaction. Heats of AISI/SAE 1030 and 4130 steel were poured to provide some benchmarking of this new technique. The peritectic was detected and the reaction temperature measured. Measurements agree reasonably well with reference information. A review of the literature and thermodynamic calculations did find some disagreement on the exact temperatures for the peritectic and solidus. Some of this difference appears to be related to the experimental techniques employed. It was determined that the system developed accurately indicates these reaction temperatures. The system provides a unique method for examining steel solidification that can be employed on the melt deck.
Go to article

Abstract

The results of the efficiency of the primary reclamation process as well as the influence of the used sand temperature and other process parameters on it are presented in this paper. A separate stand realized on a reduced scale was built, which is an analogous process of the primary reclamation treatment of spent foundry sands. The used sands were introduced to the crushing process in an agglomerated form in the way typically used in industrial devices. The primary reclamation process was realized on a set of four horizontal sieves with decreasing mesh clearances while maintaining their geometrical dimensions applied in the Regmas industrial device. The model system consists of a vibratory drive mounted on the table, allowing us to control the supply frequency of the vibratory motors within a range of 40-60 Hz as well as the computer system for measuring the vibration parameters and drive power. The used sand on the quartz matrix with the KALTHARZ U404 resin and 100T3 hardener was used in our investigations. The used sand was prepared under the following conditions: cubic-shaped elements made of the applied furan sand was compacted by vibrations then hardened and subjected to heating under controlled conditions (as a “simulation” of the overheating process taking place in the mold after pouring). Time functions of the crushing and sieving process in dependence of the overheating degree of the reference sand samples (100°, 200°, and 300°C) were investigated at various table vibration frequencies and feed loads of the sieve set. The relative index of the crushing ability was determined.
Go to article

Abstract

The research focused on the influence of the solution temperature on the structure of precipitation hardening multi-component hypoeutectic aluminium alloys. The AlSi8Cu3 and AlSi6Cu4 alloys were used in the study and were subjected to a thermal-derivative analysis. The chemical composition and crystallization of phases and eutectics shift the characteristic points and the corresponding temperatures to other values, which affect to, for instance, the solution temperature. The alloys were supersaturated at 475°C (according to the determined temperature (TSol) and 505°C for 1.5 hours. Aging was performed at 180°C for 5 hours. The Rockwell hardness measurement, metallographic analysis of alloys by means of light microscopy as well as chemical and phase analysis using scanning electron microscopy and X-ray crystallography were carried out on alloys. The use of computer image analysis enabled the determination of the amount of the current Al2Cu phase in the alloys before and after heat treatment.
Go to article

Abstract

The article is a case study of the steel milling ring casting of about 6 tonnes net weight. The casting has been cast in the steel foundry the authors have been cooperating with. The aim was to analyse the influence of the shape of the chills and the material which was used to make them on the casting crystallization process. To optimally design the chills the set of the computer simulation has been carried out with 3 chills’ shape versions and 3 material’s versions and the results have been compared with the technology being in use (no chills). The proposed chills were of different thermal conductivity from low to high. Their shapes were obviously dependant on the adjacent casting surface geometry but were the result of the attempt to optimise their effect with the minimum weight, too. The chills working efficiency was analysed jointly with the previously designed top feeders system. The following parameters have been chosen to compare their effectiveness and the crystallization process: time to complete solidification and so-called fed volume describing the casting feeding efficiency. The computer simulations have been carried out with use of MagmaSoft v. 5.2 software. Finally, the optimisation has led to 15% better steel yield thanks to 60% top feeders weight reduction and 40% shorter solidification time. The steel ring cast with use of such technology fulfil all quality criteria.
Go to article

This page uses 'cookies'. Learn more